Arfa 1018S, Инструкция по эксплуатации

Страница: 5 / 36

1 WARNING: FAILURE TO FOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
As with all machinery there are certain hazards involved with operation and use of the
machine. Using the machine with respect and caution will considerably lessen the
possibility of personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator may result.
This machine was designed for certain applications only. We strongly recommends that
this machine NOT be modified and/or used for any application other than for which it was
designed. If you have any questions relative to its application DO NOT use the machine
until you contact with us and we have advised you.
Your machine might not come with a power socket or plug. Before using this
machine, please
Do ask your local dealer to install the socket or plug on the power cable end.
ULES FOR ALL TOOLS
A .USER:
(1). WEAR PROPER APPAREL. No loose
clothing, gloves, rings, bracelets, or other
jewelry to get caught in moving parts.
Non-slip foot wear is recommended.
Wear protective hair covering to contain
long hair.
(2). ALWAYS WEAR EYE PROTECTION.
Refer to ANSLZ87.1 standard for
appropriate recommendations.
Also use face or dust mask if cutting
operation is dusty.
(3). DON’T OVERREACH. Keep proper
footing and balance at all times.
(4). NEVER STAND ON TOOL. Serious
injury could occur if the tool is tipped or if
the cutting tool is accidentally contacted.
(5). NEVER LEAVE TOOL RUNNING
UNATTENDED. TURN POWER OFF.
Don’t leave tool until it comes to a
complete stop.
(6). DRUGS, ALCOHOL, MEDICATION.
Do not operate tool while under the
influence of drug, alcohol or any
medication.
(7). MAKE SURE TOOL IS
DISCONNECTED FROM POWER
SUPPLY . While motor is being mounted,
connected or reconnected.
(8). ALWAYS keep hands and fingers
away from the blade.
(9). STOP the machine before removing
chips.
(10). SHUT- OFF power and clean the
BAND SAW and work area before leaving
the machine.
B. USE OF MACHINE:
(1). REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning it “on”.
(2). DON’T FORCE TOOL. It will do the
- - 3