Ares Alara, Руководство пользователя и техническая информация

Страница: 8 / 20

8
Transmitter Functionality
1. Digital trims: Your Alara 4-channel transmitter has digital trims on all four
primary controls – aileron; elevator; rudder; throttle. Each movement of
the trim button is audibly highlighted by a single beep, whilst trim center is
highlighted by two beeps.
2. Servo reverse: The rotation direction of the servos can be individually
reversed in the following manner:
• Aileron – Push and hold the aileron trim button to the right while switching
ON the transmitter. Two beeps will immediately be heard indicating that the
travel direction of the aileron servo has been reversed.
• Elevator – Push and hold the elevator trim button forward while switching
ON the transmitter. Two beeps will immediately be heard indicating that the
travel direction of the elevator servo has been reversed.
• Rudder – Push and hold the rudder trim button to the right while switching
ON the transmitter. Two beeps will immediately be heard indicating that the
travel direction of the rudder servo has been reversed.
• Throttle – Push and hold the throttle trim button forward while switching
ON the transmitter. Two beeps will immediately be heard indicating that the
travel direction of the throttle servo has been reversed.
3. Dual rates: The rate function is a great beginner feature that’s used to
decrease the sensitivity of the aileron and elevator control surfaces by
reducing servo movement. The reduced rate setting can be switched on or
off using the two position aileron and elevator dual rate switches.
• Dual rate switch in the UP position = full rate and full servo movement
• Dual rate switch in the DOWN position = reduced rate / reduced servo
movement
UP
DOWN