Ares Alara Скачать руководство пользователя страница 5

5

Safety Precautions

Failure to use this product in the intended manner as described in the 

following instructions can result in damage and / or personal injury. A Radio 

Controlled (RC) airplane is not a toy! If misused it can cause serious bodily 

harm and damage to property.
Keep items that could become entangled in the propeller away from the 

propeller, including loose clothing, tools, etc. Be especially sure to keep your 

hands, face and other parts of your body away from the propeller.
As the user of this product you are solely and wholly responsible for operating 

it in a manner that does not endanger yourself and others or result in 

damage to the product or the property of others.
This model is controlled by a radio signal that is subject to possible 

interference from a variety of sources outside your control. This interference 

can cause momentary loss of control so it’s advisable to always keep a safe 

distance from objects and people in all directions around your model as this 

will help to avoid collisions and / or injury.

•  Never operate your model if the voltage of the batteries in the transmitter 

is too low.

•  Always operate your model in an open area away from obstacles, people, 

vehicles, buildings, etc.

•  Carefully follow the directions and warnings for this and any optional 

support equipment (chargers, rechargeable batteries, etc.).

•  Keep all chemicals, small parts and all electronic components out of the 

reach of children.

•  Moisture causes damage to electronic components. Avoid water 

exposure to all electronic components, parts, etc. that are not specifically 

designed and protected for use in water.

LiPo Battery Warnings

IMPORTANT NOTE: Lithium Polymer batteries are significantly more volatile 

than the alkaline, NiCd or NiMH batteries also used in RC applications. 

All instructions and warnings must be followed exactly to prevent property 

damage and / or personal injury as the mishandling of LiPo batteries can 

result in fire. By handling, charging or using the included LiPo battery you 

assume all risks associated with LiPo batteries. If you do not agree with these 

conditions please return the complete product in new, unused condition to 

the place of purchase immediately.

•  You MUST charge the LiPo battery in a safe area away from flammable 

materials.

•  NEVER, at any time, leave the LiPo battery unattended when it’s being 

charged.

Содержание Alara





















Отзывы: