Ares Alara, Руководство пользователя и техническая информация

Страница: 13 / 20

13
13. Now connect the aileron clevises to the outer hole of each control horn
and note, again, that you may have to screw the clevis in or out to ensure
that the control surface remains in the neutral position.
14. Ensure that the control surfaces operate in the right direction. With
the model in front of you, facing away, move the rudder stick to the left
and check that the rudder moves left in response. Right rudder stick
will move the rudder to the right. In the unlikely event that the rudder
responds in the opposite direction, use the servo reverse function to alter
the direction of travel.
15. Pull the elevator stick back and check that the elevator moves in an
upward direction. Push the elevator stick forward and check that the
elevator moves in a downward direction. In the unlikely event that the
elevator responds in the opposite direction, use the servo reverse
function to alter the direction of travel.
16. Moving the aileron stick to the right should cause the right-hand aileron
to move in an upward direction whilst the left-hand aileron moves
downward. Moving the aileron stick to the left will have the opposite
effect. In the unlikely event that the ailerons respond in the opposite
direction, use the servo reverse function to alter the direction of travel.
UP
DOWN
UP
DOWN
LEFT RIGHT
LEFT RIGHT
UP
LEFT