Ares Alara, Руководство пользователя и техническая информация

Страница: 14 / 20

14
17. Open the throttle slowly and check that the motor shaft turns in a
clockwise direction (when viewed from the rear).
18. Remove the canopy, unplug the Li-Po battery and switch OFF the
transmitter. Slide the propeller over the motor shaft, position the Allen
screw directly above the flat section of the shaft and securely tighten it.
19. Check that your Alara sits level when balanced on either side of the
fuselage at a point 65 – 70mm back from the leading edge. Adjust the
position of the battery to ensure that the balance point is achieved.
20. With the throttle stick in the low position, switch ON the transmitter once
more and connect the battery to the ESC whilst keep well clear of the live
propeller. Refit the canopy and check once more that the control surfaces
move in the correct manner. Your Alara is now ready to fly.