Ares Alara Скачать руководство пользователя страница 4

4

Introduction

Thank you for purchasing the Ares Alara. As an aspiring R/C pilot, you need 

an airplane that checks off a number of crucial boxes. You need it to be easy 

to fly and forgiving of basic errors. You’ll want it to be tough, able to withstand 

some punishment, and you’ll demand solid everyday reliability. In addition, a 

good flight duration, speedy assembly, convenient transport and easy storage 

will be high on your list. To coin a phrase, a ‘beginner friendly’ airplane is 

what you’re looking for, and the Ares Alara is the perfect choice.
Supplied 100% factory-assembled, the Alara’s advanced EPO airframe is 

both strong and light, while the rear-mounted motor protects the power 

system from inevitable heavy landings. Offering superb low-speed handling 

characteristics and a benign stall, this is an airplane that’s been designed to 

look after you, give you time to react, and learn at a comfortable pace.
Technically advanced, the Alara incorporates a Hitec Red 2.4GHz radio 

system that’s compatible with all current 2.4GHz Hitec aircraft transmitters. 

Moreover, to suit your needs, two convenient versions of the model are 

available, both incorporating Hitec Red protocol: choose either Ready-To-

Fly (including a Hitec Red-enabled transmitter and receiver) or Pair-To-Fly 

(supplied with a Hitec Red receiver that’s compatible with your existing Hitec 

transmitter). Every Alara comes with a powerful factory-installed motor and 

ESC, a quiet and efficient 6-blade propeller, quality servos, a 1500mAh 3S 

Li-Po battery, plus a DC balancing charger and AC adapter.
So, for first-time flyers looking to get started, the Alara is the perfect choice. 

Sport flyers, meanwhile, will appreciate its gentle, glider-like characteristics 

and basic aerobatic ability.

FCC Information

This device complies with part 15 of the FCC rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including 

interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.
This product contains a radio transmitter with wireless technology which 

has been tested and found to be compliant with the applicable regulations 

governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency 

range.
The associated regulatory agencies of the following countries recognize the 

noted certifications for this product as authorized for sale and use: USA, UK, 

AU and EU

Содержание Alara





















Отзывы: