p5
4. PROGRAMMING
4.1 Communication with the instrument
Several functions can be accessed directly on front face during
the measure display
:
4.3 Main menu
4.2 Orientation through the programming
The dialogue is ensured by 4 keys located on the front face.
Move through the menus:
downwards, or decrease
the value shown
Validation of the displayed
parameter or access to a submenu
Exit from a submenu to access
the next menu / access to the
programming exit menu
Note:
In mode programming the instrument will automatically revert to
the measure with the former configuration if no key is pressed during
1min.
Move through the menus:
upwards, or increase the
value shown
Display of
the max.
value
p20
0 reset of
the min. and
max.
p20
Access to the
main menu
p5
available as
option
Mode read-
ing
of the
configuration
(see
p18
)
If code correct,
access to the
programming
menu
(see
p6
)
Simulation
of the ana-
log output
(see
p19
)
Authorized by
access code
Deleting of
the recorded
alarms
(see
p19
)
Other functions can be accessed by pressing several keys
simultaneously:
Setting of the display down scale; (see
p21
)
Setting of the display full scale; (see
p21
)
Visualisation of the direct measure; (see
p21
)
Visualisation and setting of the alarm setpoints; (see
p22
)
Setting of the tare (except temperature inputs; (see
p22
)
Reading convention:
Move through the main menu
Revert to the previous menu
Blinking display: awaiting validation or setting
Alternating information display
Entering a parameter:
First start by increasing or decreasing
the 1st digit and the sign: from -9 to +9.
The 2 nd from 0 to 9.
The 3 rd from 0 to 9.
The 4 th from 0 to 9.
M
M
Alarms
Led 1
Led 2
Led 3
Led 4
Functions
Led 5
Led 6
Led 7
Led 8
Measure
display
M
6
888
6
5
88
65
2
8
652
0
rEAd
ProG
CodE
8 888
GEnE.
CLEAr
«
«
«
«
«
«
Programming
of the
access
code
(see
p18
)
Simulation
of the
display
(see
p19
)
Authorized by
access code
(relay/ analog
output)
(analog
output)
(process, resist.
potent. input)
(relay output)
P.CodE
SIMUL
«
«
0 reset of
the function
TARE
(see
p20
)
Authorized by
access code
CLr.tA
«
scroll
menus
vertical
move
Entering of the access code.
The access to the programming
menu is protected by a 4-cipher
code.
The code is 0000 on factory exit
(to change the code, see
page
19
).
Between each entering, validate
the cipher with
Display of
the min.
value
p20
+
M
+
M
+
M
+
+
and
