p16
GEnE.
GEnE.
Value of the
output
if
Enter the value
to be injected
M
Press Menu to
revert to the
measure dis-
play.
Note
: The instrument will carry on measuring during the simulation. Only
the analog output will no longer react to the measure.
(accessible according to the programmed
access code and if option analog output)
CLEAr
4.10.3 Menu
: Deleting of the recorded alarms
If the function recording of alarms has been programmed:
the status of the relay will be recorded after the setpoint has been passed.
If the setpoint is passed back the other way, the status of the relay does
not change and the corresponding led starts to blink.
To revert to the normal status (led not blinking and relay in the correct
state) use menu CLEAr.
M
CLEAr
the recorded alarms are
not deleted
deleting of the recorded
alarms, and revert to the
measure display
Reminder:
If no key is pressed during 20 s., the
instrument will revert to the measure display.
Note
: An exit from mode programming with saving of the configuration
will reset the alarm recordings to zero.
4.10.2 Simulation of the analog output
(mode generator)
CLr.tA
4.10.4 Menu
: Suppressing of the programmed tare
M
CLr.tA
the entered tare is not
deleted
suppressing of the ente-
red tare, and revert to the
measure display
Reminder:
If no key is pressed during 20 s., the
instrument will revert to the measure display.
(accessible according to the programmed
access code)
