Arctiko UPUL 580, Руководство по эксплуатации, Страница: 9 / 20

Example
SetPoint is adjusted to - 83 °C. The reference thermometer indicates - 85 °C. To correct this enter - 2°C and
the freezer will cool down to - 85 °C. The LMC260 will now operate with the new correct value.
Resetting this value to the factory setting is done by setting the CALI value to 0°C.
Alarm
Alarm list
Alarm system
The upper LED will flash when there is an alarm. The operation status will change to "ALARM". In the sub
menu "View" the reason for the alarm and the alarm code can be read. The alarm will change from actve to
inactive when the reason for the alarm has been removed.
After entering the access code the “Alarm Menu” can be activated. Delete an inactive alarm from the list by
pushing the Turn/Push Button. Active alarms cannot be acknowledged.
In the “ALARM LOG” sub menu the last 16 alarms can be read.
If the mains voltage is interrupted the mains voltage will be checked continously.
9
Alarm no. Alarm Alarm text display Limit Sound
AL10 T1Open T1 OPEN -90 °C X
AL11 T1 Short T1 SHORT 149 °C X
AL12 T2 Open T2 OPEN -90 °C X
AL30 Power Fail MAINS OFF - X
AL31 Door open DOOR Door opeen > 15min X
AL32 TRoom ROOMTEMP Room temperature too high X
AL33 TLow T LOW Freezer temperature too low X
AL34 Thigh T HIGH Freezer temperature too high X
AL40 Room Sensor T.SENSOR
AL41 Door Sensor D.SENSOR
AL42 No Sound in
Test D N U O S O N
AL02 SW error SOFTWARE
AL04 Initialisering INIT
AL05 Database DATABASE
AL06 Watchdog WATCHDOG