Arctiko UPUL 580, Руководство по эксплуатации, Страница: 5 / 20

Inner doors
NOTE
The inner doors should be used at all times. Make sure to close them tightly. (figure 1)
The manufacturer is not responsible for damage to the freezer caused by failure to do so.
Electrical Connection
The machine meets current EU directives. Low voltage 2006/95/EEC.
Electromagnetic compatibility 2004/108/EEC.
The machine should be given extra protection in accordance with Electricity Supply Regulations in order to
protect the user against dangerous electric shocks in the event of faults.
If the switch is for a three-pin plug, a three-pin plug should be used and the conductor with yellow/green
insulation connected to the Earth terminal.
Data regarding voltage and absorbed power/current is given on the rating plate.
Electrical connection must be made in accordance with the local regulations.
For installation see wiring diagram (page 18 - 19).
Warning
Regulations require that this appliance be earthed:
The manufacture declines all liability for injury to persons or animals and for damage to property resulting
from failure to observe the above procedures and reminders.
If the socket and plug are not of the same type either the socket or the plug must be replaced by a qualified
electrician.
Under no circumstances use extension leads or adaptors.
1. The freezer should be connected by an authorised electrician or by the company that sold the
freezer. Incorrect installation may damage the freezer.
2. Place the freezer on a flat floor that can bear the weight of the freezer.
3. The electrical installation should be earthed.
4. Do not use extension cables. Connect the freezer directly to a fixed installation. If the freezer is
connected to a long extension cable there is a risk that the cable will become hot.
5. The freezer should be placed in a dry location. Do not allow water to come into contact with the
cabinet. Water entering electrical parts may cause short-circuiting.
6. In the event of functional or electrical irregularities, please contact an authorised service engineer.
5