Arctiko UPUL 580, Руководство по эксплуатации, Страница: 7 / 20

Turn/Push button
The LMC 260 control panel is controlled by turning / pushing the button at the right hand side of the display.
The button has three functions:
Turn CW
:Next Menu or increase set value
Turn CCW :Previous Menu or decrease set value
Push
:Select Menu and accept edited set value
Main switch
The LMC 260 control panel has a main switch. It is located at the left hand side of the display and has two
functions:
Up
:The freezer is in Standby Mode. Works like an OFF function but the temperature readout is
active.
Down :The freezer is in Auto Mode. Works like a normal ON switch, where the controller controls the
freezers temperature, the CTS signal and alarm system.
Menu selection
The menu can be changed by turning the turn/push button. The menus shown with an arrow in the lower
righthand corner, have sub menus. The submenu is activated by pressing the button once. When turning the
button the submenu items appear. Pressing on the item “Menu Up” exits the submenu.
Adjustment of settings
Turn the button until the required parameter value is shown in the display. Press once to edit the value. It
will now flash. Turn the button to adjust the parameter. Press the button to accept the value or cancel it by
not pressing the button for 5 seconds.
Menu overview
See menu structure page 13 - 17.
Operation description
Operating mode and status
The user selects the operating mode of the system with the switch at the left side of the display:
The actual status of system is shown in upper line of the main menu:
7
Operation Description
STANDBY The temperature in the freezer is shown but there is no regulation/control
AUTO The LMC260 controls the temperature in the freezer
Status Desription
STANDBY Freezer is turned off. No active functions except the actual freezer temperature
FREEZER Normal mode. Temperature regulation is active.
TEST User test active
T1 OPEN Temperature sensor for the freezer is open
T1 SHORT Temperature sensor for the freezer is closed
T2 OPEN Temperature sensor for the room is open
PWR FAIL There is no mains on and the main switch is in auto mode
DOOR Door is open
ROOM TEMP Room temperature too high
T LOW The freezer temperature is too low
T HIGH The freezer temperature is too high