Arctiko ULUF, Оригинальная инструкция по эксплуатации, Страница: 5 / 27

Installation
Preparing the appliance
- Unpack the appliance: - Remove all packaging materials, plastic bags and
straps.
- Storing the key: - The key for the door lock is placed strapped to the main
cable in the compressor compartment. Remove the key from the cable
carefully without causing damage to the cable. Keep the key in a safe place.
- Read the Quick start guide: - The quick guide is provided with the appliance.
- Ventilate the appliance: - Open the door for at least 20min in order to
ventilate the appliance before first use. The appliance may contain odors
from manufacturing.
- Clean the appliance : - Clean the appliance on the inside and outside with a
soft cloth/sponge using a solution of water and light detergent. After cleaning
all surfaces of the appliance, wipe the inside with a dry rag.
- Remote alarm contact: - The terminals for the remote alarm contact are
located in the compressor compartment (see “Cabinet description”).
The contact is designed for a maximum load of 2A and 30VDC. The remote
alarm contacts work in synchronization with the acoustic alarm on the
appliance. In order to cancel the remote alarm push the “Enter” button.
However, in case of a power outage, the remote alarm contact cannot
be controlled by the control panel of the appliance. The remote alarm can be
set as normally open (NO) or normally closed (NC).
Refrigerant
Please see the rating plate affixed to the appliance to obtain information about
the refrigerant.
Location
Place the appliance in a location that satisfies the following conditions in or-
der to achieve optimal operating results:
- Firm and levelled floor: - Placing the appliance on a firm and flat floor
reduces the risk of excessive noise and vibration.
- Away from any heat sources: - Avoid placing the appliance near any heat
dissipating devices such as a gas burner/stove, radiator, oven or other
source of heat. Exposing the appliance to heat will lower the performance.
- Place the appliance away from direct sunlight: Placing the appliance in
direct sunlight may cause reduced performance and shorten the life
expectancy.
- Dry area: - Avoid placing the appliance near damp areas such as near water
faucets and sinks.
- Clean area: - Placing the appliance in a clean environment will reduce risk
of function failure. Avoid installing the appliance in or near chemicals and
materials that might have outgassing property to avoid corrosion.
- Well ventilated: There must be sufficient space around the appliance to
ensure air ventilation. Lack of such space will reduce the cooling
capability of the appliance.
- Do not place any objects on top of the appliance.
!
8 9
An electrical power plug with a ground prong must be used to
power the appliance. This is to prevent electrical shock.
Do not use the appliance outdoors.
Current leakage or electric shock may result if the appliance is
exposed to rain.
!
Never install the appliance in a flammable or volatile location.
This may cause explosion or fire.
Install the appliance on a sturdy floor and take an adequate
precaution to prevent the appliance from tipping.