3-3
3
Y-6
(Table of Contents)
Removing Engine/Transmission.............................. 3-3
Disassembling Engine/Transmission....................... 3-6
Servicing Components.......................................... 3-16
Assembling Engine/Transmission ......................... 3-22
Installing Engine/Transmission.............................. 3-34
Removing
Engine/Transmission
1. Remove the seat, front and rear fenders, and left
and right floor panels.
2. Remove the negative cable from the battery;
then remove the positive cable. Remove the bat-
tery.
CD578
3. Drain the transmission oil.
NOTE: The drain plug is an 8 mm cap screw with
a copper washer located at the left-rear of the
transmission.
CD632A
4. Drain the engine oil.
NOTE: The oil drain plug is a 12 mm cap screw
with a copper washer located at the lower-left-front
of the crankcase.
CD634A
5. Remove the engine ground wire from the starter
motor.
KM546A
6. Remove the two cap screws securing the gas
tank; then remove the gas tank. Tilt the gas tank
to drain the gasoline into an appropriate con-
tainer; then set it aside making sure it is properly
sealed.
! WARNING
Battery acid is harmful if it contacts eyes, skin, or
clothing. Care must be taken whenever handling a
battery.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
