Arctic Cat Prowler 700i HDX 2015, Руководство пользователя

Страница: 54 / 94

6 Driving
54
6.2 Starting / switching off the engine
6.2.1 Starting the engine (Wildcat)
1. Fasten the safety belt.
2. Close the doors.
3. Move gear lever into park position.
4. Press the brake pedal.
5. Turn the ignition key to RUN position and release as soon as the engine is run-
ning. Do not accelerate while doing this.
6. Let the engine warm up.
6.2.2 Starting the engine (Prowler XT)
1. Fasten the safety belt.
2. Close the side safety straps.
3. Activate hand brake.
4. Turn the ignition key to RUN position and release as soon as the engine is run-
ning. Do not accelerate while doing this.
5. Let the engine warm up.
WARNING
Provide adequate ventilation when operating the engine in closed rooms. Do
not start or run the engine in a closed room without a suitable extraction sys-
tem.
ATTENTION
Do not actuate the starter motor longer than 8 seconds per starting process.
If more starting processes are necessary: wait 15 seconds in between the
starting processes to allow the starter motor to cool down.
ATTENTION
Do not accelerate while the transmission is in park position. Otherwise, the
drive belt will be damaged.
ATTENTION
When the transmission is in park position: do not run the engine more than
5 minutes.