Arctic Cat Prowler 700i HDX 2015, Руководство пользователя

Страница: 79 / 94

Maintenance 7
79
7.11.5 Replacing front indicator lamp (Wildcat)
Replace indicator lamp as follows:
1. Unscrew screw on lamp glass and remove lamp glass.
2. Pull defective light bulb out of lamp socket.
3. Insert new light bulb into the lamp socket.
4. Position lamp glass and fasten with screw.
7.11.6 Replacing taillight (Wildcat)
Replace taillight as follows:
1. Remove connector from taillight.
2. Unscrew screws on the lamp housing and remove taillight with nuts.
3. Fasten new taillight with screws and nuts.
4. Insert connector into the taillight.
7.11.7 Replacing taillight / brake light (Wildcat Sport/Trail)
Replace taillight / brake light as follows:
1. Remove connector from lamp holder.
2. Unscrew five screws on top and two screws on the bottom of the lamp holder.
3. Remove lamp holder.
4. Unscrew three nuts and remove defective taillight / brake light from lamp holder.
5. Fasten new taillight / brake light with three nuts on the lamp holder.
6. Fasten lamp holder to the vehicle with five screws on top and two screws on the
bottom.
7. Connect connector to lamp holder.
7.11.8 Replacing taillight / brake light (Prowler)
Replace taillight / brake light as follows:
1. Unscrew screws on the lamp housing and remove taillight.
2. Turn lamp holder anti-clockwise as far as it will go and take it out of the headlight
housing.
3. Pull light bulb out of lamp holder.
4. Insert new light bulb into the lamp holder.
5. Insert the lamp holder into the lamp housing and turn clockwise as far as it will go.
6. Fasten lamp housing on the vehicle with the screws.
NOTE
LEDs cannot be replaced. In the event of a defect, the entire lamp must be
replaced.