67
GENERA
L INFOR
M
A
T
ION
4. Allow the range lever to lock into
the desired position.
Range Lever
(500 - Manual
Transmission)
NOTE: All five of the trans-mis-
sion gears and reverse can be
used in both HIGH and LOW
ranges.
The range lever is used for changing
the output ratio of the transmission.
Select HIGH or LOW range according
to intended use of the ATV. Always
come to a complete stop before
attempting to shift from one range to
the other.
ATV0078A
Shift on level ground or engage the
brake lever lock.
High Range
— Normal riding with
light loads.
Low Range
— Carrying heavy loads
or trailer towing. Compared to HIGH
range, the LOW range position pro-
vides slower speed and greater torque
to the wheels.
To shift to a different range, use the fol-
lowing procedure:
1. Stop the ATV completely. If on an
inclined surface, engage the brake
lever lock.
2. Shift the transmission into neutral.
3. Pull the range lever up and move it
to the desired position (forward
position for HIGH range - rear-
ward position for LOW range).
4. Allow the range lever to lock into
position.
Gearshift Pedal
(Manual Transmission)
The gearshift pedal is attached to a
ratchet mechanism in the transmission.
Each time a gear is selected, the gear-
shift pedal will return to its normal
position ready to select the next gear.
736-567B
! CAUTION
Make sure the range lever locks into
the desired position before shifting
the transmission.
! WARNING
If the range control is shifted when
the ATV is moving, it could reduce
speed suddenly throwing the opera-
tor from the ATV and possibly cause
damage to the transmission.
500
! CAUTION
Make sure the range lever locks into
the desired position before shifting
the transmission.
! WARNING
If the range lever is shifted from
high range to low range when the
ATV is moving, it could reduce
speed suddenly throwing the opera-
tor from the ATV and possibly cause
damage to the transmission.
250/300