63
GENERA
L INFOR
M
A
T
ION
Speedometer (300/400
ACT Auto/400 TBX)
0739-499
1.
Speedometer
— The speedo-
meter shows approximate speed.
2.
Odometer
— The odometer
shows the total distance traveled.
3.
Trip Meter
— The trip meter is an
odometer which can be reset. It
can be used to show the distance
traveled on short trips or between
gas stops. Turning the knob coun-
terclockwise resets the trip meter
to zero.
Speedometer/
Indicator Lights
(400 FIS/500/650)
NOTE: The indicator lights will
illuminate for approximately two
seconds when the ignition switch
is rotated to the ON position.
738-504A
1.
Odometer/Trip Meter Display
Button
— Press the display button
to display the Odometer (10), the
A & B Trip Meters (10), and in
conjunction with the Clock/Hour
Display Button (6), the speedome-
ter km/h and mph displays.
2.
Reverse Indicator
— A red light
will illuminate when the transmis-
sion is shifted into reverse gear.
The light will go off when shifted
out of reverse.
3.
Neutral Indicator
— A green
light will illuminate when the
transmission is in neutral and the
ignition switch is on. The light will
go out when shifted into any gear
other than neutral.
4.
High Beam Indicator
— A blue
light will illuminate when the
lights are on high beam. The light
will not be illuminated when the
lights are switched to low beam.
5.
Temperature Indicator
— A red
light will illuminate if the engine
overheats. The light should be off
during normal operation.
NOTE: High engine RPM, low
vehicle speed, or heavy load can
raise engine temperature.
Decreasing engine RPM, reducing
load, and selecting an appropriate
transmission gear can lower the
temperature.
NOTE: Debris in front of the
engine (or packed between the
cooling fins of the radiator) can
reduce cooling capability. Using a
hose, pressure-wash the radiator
and the engine to remove any
debris preventing air flow.
! CAUTION
Continued operation of the ATV with
high engine temperature may result
in engine damage or premature
wear.