Arctic Cat 2006 DVX 400, Руководство оператора

Страница: 10 / 32

Page 19
Parking brake
The parking brake should only be applied as an auxiliary brake. Whenever a braking
situation is needed, use the foot brake. Engage the parking brake by pulling the brake lever
upwards.
!! ATTENTION !!
Always check to be sure that the parking brake has been disengaged before operating
the ATV. An accident could result if the parking brake is left engaged while the ATV is
operated. The brake may relax if left engaged for a long period of time. This could cause
an accident; therefore, do not leave the ATV on a hill depending on the parking brake for
more than an hour. Always block the downhill side of the wheels if leaving the ATV on a
hill or park the ATV in a side hill position.
Light switch
Use the headlight HI/LO switch to select the high or low
headlight beam when the ignition switch is in the LIGHTS
position. The light switch has 2 positions: low beam, high
beam.
Light switch
Page 20
Electric Starter Button
Pushing in on this button activates the starter motor. Before
starting the engine, make sure the ignition switch is in the ON
position, the transmission is in NEUTRAL, the reverse shift lever is
in the forward position and the parking brake is engaged.
Choke Lever
The choke lever is used to help start a cold engine. Press the lever down fully to activate
the choke. Return the lever to the full upright position to de-activate the choke. When the
engine is already warm, it is not necessary to use the choke.
Throttle Lever
Control engine RPM with the position of the throttle lever.
Operate this lever with the thumb. Pushing it forward
increases engine RPM
Foot Brake Pedal
Pressing the foot brake pedal downward will apply the brake to the front and rear wheels.
Hand Brake Lever
Compressing the brake lever toward the handlebar will
also apply the brake to the front and rear wheels.
Auxiliary brake
lever
Clutch
RES