28 /EN
8
Troubleshooting
Oven emits steam when it is in use
Oven emits steam when it is in use
Oven emits steam when it is in use
Oven emits steam when it is in use
.
It is normal that steam escapes during operation. This is not a fault.
Water drops occur during cooking
Water drops occur during cooking
Water drops occur during cooking
Water drops occur during cooking
The vapour that arises during cooking can condense and form water droplets when it hits cold surfaces of the
product. This is not a fault.
Product does not oper
Product does not oper
Product does not oper
Product does not operate.
ate.
ate.
ate.
The mains fuse is defective or has tripped.
Check fuses in the fuse box. If necessary, replace or
reset them.
Product is not plugged into the (grounded) socket.
Check the plug connection.
Buttons/knobs/keys on the control panel do not
function.
Keylock may be enabled. Please disable it. (See.
Using
the keylock, page 21
Oven light does not work.
Oven light does not work.
Oven light does not work.
Oven light does not work.
Oven lamp is defective.
Replace oven lamp.
Power is cut.
Check if there is power. Check the fuses in the fuse
box. If necessary, replace or reset the fuses.
Oven does not heat.
Oven does not heat.
Oven does not heat.
Oven does not heat.
Function and/or Temperature are not set.
Set the function and the temperature with the Function
and/or Temperature knob/key.
In models equipped with a timer, the timer is not
adjusted.
(In products with microwave oven, timer controls only
microwave oven.)
Adjust the timer.
Power is cut.
Check if there is power. Check the fuses in the fuse
box. If necessary, replace or reset the fuses.
There is no gas.
There is no gas.
There is no gas.
There is no gas.
Main gas valve is closed.
Open gas valve.
Gas pipe is bent.
Install gas pipe properly.
There is no ignition spark.
There is no ignition spark.
There is no ignition spark.
There is no ignition spark.
No current.
Check fuses in the fuse box.
Timer is not set.
Set the timer.
Burners are not burning properly or at all.
Burners are not burning properly or at all.
Burners are not burning properly or at all.
Burners are not burning properly or at all.
Burners are dirty.
Clean burner components.
Burners are wet.
Dry the burner components.
Burner cap is not mounted safely.
Mount the burner cap properly.
Gas valve is closed.
Open gas valve.
Gas cylinder is empty (when using LPG).
Replace gas cylinder.
(In models with timer) Clock display is blinking
(In models with timer) Clock display is blinking
(In models with timer) Clock display is blinking
(In models with timer) Clock display is blinking or clock symbol is on.
or clock symbol is on.
or clock symbol is on.
or clock symbol is on.
A previous power outage has occurred.
Adjust the timer / Switch of the product and switch it
on again.
Consult the Authorised Service Agent or the
dealer where you have purchased the
product if you can not remedy the trouble
although you have implemented the
instructions in this section. Never attempt to
repair a defective product yourself.
