10 /EN
3
Installation
Refer to the nearest Authorised Service Agent for
installation of the product. Make sure that the
electric and gas installations are in place before
calling the Authorised Service Agent to have the
product ready for operation. If not, call a qualified
electrician and fitter to have the required
arrangements made. The manufacturer shall not
be held responsible for damages arising from
procedures carried out by unauthorized persons
which may also void the warranty.
Preparation of location and electrical and
gas installation for the product is under
customer’s responsibility.
DANGER
DANGER
DANGER
DANGER
The product must be installed in
accordance with all local gas and/or
electrical regulations.
DANGER
DANGER
DANGER
DANGER
Prior to installation, visually check if the
Prior to installation, visually check if the
Prior to installation, visually check if the
Prior to installation, visually check if the
product has any defects on it. If so, do
product has any defects on it. If so, do
product has any defects on it. If so, do
product has any defects on it. If so, do
not have it installed.
not have it installed.
not have it installed.
not have it installed.
Damaged products cause risks for your
safety.
Before installation
To ensure that critical air gaps are maintained
under the appliance, we recommend that this
appliance is mounted on a solid base and that the
feet do not sink into any carpet or soft flooring.
The kitchen floor must be able to carry the weight
of the appliance plus the additional weight of
cookware and bakeware and food.
•
It can be used with cabinets on either side
but in order to have a minimum distance of
400mm above hotplate level allow a side
clearance of 65mm between the appliance
and any wall, partition or tall cupboard.
•
It can also be used in a free standing position.
Allow a minimum distance of 750 mm above
the hob surface.
•
(*) If a cooker hood is to be installed above
the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height (min 650 mm).
•
The appliance corresponds to device class 1,
i.e. it may be placed with the rear and one
one
one
one
side to kitchen walls, kitchen furniture or
equipment of any size. The kitchen furniture
or equipment on the other
other
other
other side may only be
of the same size or smaller.
•
Any kitchen furniture next to the appliance
must be heat-resistant (100 °C min.).
Room ventilation
Room ventilation
Room ventilation
Room ventilation
All rooms require an openable window, or
equvalent, and some rooms will require a
permanent vent as well.
The air for combustion is taken from the room air
and the exhaust gases are emitted directly into the
room.
Good room ventilation is essential for safe
operation of your appliance. If there is no window
