10 /35 EN
Refrigerator / User Manual
4.1. Things to be done
for energy saving
A
Connecting the product to electric
energy saving systems is risky as it
may cause damage on the product.
t
For a freestanding appliance; ‘this
refrigerating appliance is not intended to
be used as a built-in appliance.
t
t
Do not leave the doors of your refrigerator
open for a long time.
t
Do not put hot food or drinks in your
refrigerator.
t
Do not overload the refrigerator, cooling
capacity will fall when the air circulation
inside is hindered.
t
In order to store maximum amount
of food in the freezer compartment,
the icematic, available in the freezer
compartment and easily removable by
hand, shall be taken out. Net volume and
energy consumption values declared on
the power data plate of your refrigerator
are measured and tested by removing
the icematic. Do not remove the shelves
inside the freezer compartment and on
the door of freezer compartment shall not
be removed and they shall always be used
they provide ease of use and efficiency in
energy consumption.
t
Airflow should not be blocked by
placing foods on the sides of the freezer
compartment fan. A minimum distance
of 3 cm shall be provided on the sides of
protective fan cover.
t
The baskets/drawers that are provided
with the chill compartment must always
be in use for low energy consumption and
for better storage conditions.
t
Food contact with the temperature
sensor in the freezer compartment may
increase energy consumption of the
appliance. Thus any contact with the
sensor(s) must be avoided.
4
Preparation
t
Depending on the features of your
product, thawing frozen food in fridge
compartment will both provide energy
saving and preserve the food quality.
t
Do not allow contact of the food with the
fridge compartment temperature sensor
shown in the figure below.
t
Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. In this energy saving
function, functions and components
such as compressor, fan, heater, defrost,
lighting, display and so on will operate
according to the needs to consume
minimum energy while maintaining the
freshness of your foodstuff.
t
In case of multiple options are present
glass shelves must be placed so that
the air outlets at the backwall are not
blocked, prefably air outlets are remaining
below the glass shelf. This combination
may help impoving air distribution and
energy efficiency.
