USER MANUAL
ARC
LAST UPDATED: 3/08/2018
14
There are a lot of important steps and consider while mounting the front
wheel. Let
’
s take a moment to summarise the front motor assembly:
•
Install tyre and tube
•
Install disk brake rotor (if required)
•
Check that washer positions are similar on both sides
•
Attempt to insert the motor into the drop outs.
•
If the motor does not fit initially, check what it is fouling on (disc brake,
washer position or frame)
•
If the motor is fouling because of the washer position, adjust washer
positions to create more or less space as required to fit the motor.
•
If the motor is fouling because of the disk brake position, adjust the brake
calliper to create more space as required.
•
If the motor is fouling on a part of the bicycle frame, you may be doing
something incorrectly or the bicycle may simply be incompatible with this
kit. Please contact support right away for assistance.
•
Once the motor has been mounted on the forks, secure the motor by
tightening down the axle nuts. Ensure that washers are placed on the axle
before tightening the axle nuts.
Take each step slowly and ensure that it fits before moving onto the next step.
The motor will rarely have to be forced into position and, if mounted correctly,
should be rotating without rubbing on any part of the frame. Each bicycle is
slightly different to convert and will require some common sense to complete.
If you get stuck at any point or your are concerned you
’
ve made a mistake,
please contact support at once.
ASSEMBLY—FRONT MOTOR SUMMARY
