USER MANUAL
ARC
LAST UPDATED: 3/08/2018
20
To mount the PAS, apply a single zip tie around the top section of the PAS unit.
This will allow you to partially test operation before mounting it more
permanently. The sensor should be no further than 5mm away from the
magnet wheel and not have a large angle.
ASSEMBLY—PEDAL ASSISTANCE
Now that the PAS is fitted, when the system is turned on the and the pedals are
turned, the motor will activate. You will notice that the light on the PAS will
flash when the system is operating. If this is not flashing you may need to adjust
the sensor
’
s location/angle so that the sensor is very close to the magnet
wheel.
