USER MANUAL
ARC
LAST UPDATED: 3/08/2018
11
Now to mount the motor into the front forks.
ASSEMBLY—FRONT MOTOR
Familiarise yourself with the washers and their positions. Ensure that the
torque washers (which are the washers with a notch) are both on the same way
on the axle.
Line the torque washers up with the axle slots. As you can see in the
photograph on the right, the torque washer will not fit in the axle slot with the
current washer configuration. We will need to remove the internal washer from
the setup so that the torque washer is the only washer present on that side.
This section is different for every bike and will require some common sense to
complete the install.
