Arbonia wfc, Инструкция по установке и эксплуатации

Страница: 18 / 44

18
If no temperature level is programmed in a pe-
riod, the antifreeze function is active.
If the last period is active, program modifi ca-
tion is accepted.
If there is no input within a period of 4 mi-
nutes, all inputs are discarded and the thermo-
stat goes back to the previous program state.
Modify towel warming programs ( , )
►
Select the desired program and confi rm it.
►
Select the
mODiFY
menu item and confi rm
it.
The cursor is in the fi rst predefi ned period.
► Select the new start and new end of the pe-
riod and confi rm each one.
►
If necessary, adjust the other periods in the
same manner.
Note: individual periods can be skipped
by pressing the acknowledgement button
twice.
If no programming is done within a period, an-
tifreeze function is active.
If the last period is active, program modifi ca-
tion is accepted.
If there is no input within a period of 4 mi-
nutes, all inputs are discarded and the thermo-
stat goes back to the previous program state.
Delete program
The programmed day blocks and periods are
deleted. The program can be re-created. This
procedure is advisable for major changes.
Create program
Day blocks and periods (maximum 12 swit-
ching commands per day) can be defi ned, in
which regulation of room temperature or the
towel warming modes are active.
To recreate an existing program, it must be de-
leted beforehand.
Create room temperature regulation pro-
grams (presence
, P1, P2, P3)
► Select the desired program and confi rm it.
► Select the
create
menu item and confi rm
it.
►
Defi ne the day block by pressing the ack-
nowledgement button.
►
To add additional days to a day block, select
aDD. DaYS
and confi rm it.
► When you have added all desired days to a
day block, select
enter time
.
►
Select the start of the fi rst period and con-
fi rm it.
►
Select the desired room temperature level
(comfort temperature
or reduced tempe-
rature ) and confi rm it.
►
Select the end of the fi rst period and con-
fi rm it.
► If necessary, adjust the other periods in the
same manner (
enter time
).
If no temperature level is programmed in a pe-
riod, the antifreeze function is active.
►
If necessary, adjust the additional day blocks
in the same manner (
neW DaY BlOcK
).
►
Conclude programming with
SaVe & Quit
.
If there is no input within a period of 4 mi-
nutes, all inputs are discarded and the thermo-
stat goes back to the previous program state.
Create towel warming programs ( , )
► When creating the towel warming pro-
grams, proceed in the same manner as
creating programs for room temperature
regulation.
Periods are determined for the preset heater
level.
Antifreeze function is active between the pro-
grammed periods.
Factory settings programs
This menu item is available only after mo-
difying, deleting or creating a program and
restoring the factory setting.
Menu – options
Info
Display of type, device number and software
status.
Factory settings
Resets the entire device to factory settings
(date and time remain intact).