Arbonia wfc, Инструкция по установке и эксплуатации

Страница: 13 / 44

13
Commissioning / changing the battery
The thermostat operates with 4 batteries 1.5 V
of the type LR6 or AA.
Do not use rechargeable batteries.
► Remove the housing cover (9) (see Fig. F1).
►
Insert the batteries. Pay attention to the
correct polarity.
►
Fit the housing cover (9) again (see Fig. F2).
►
Make the basic setup (
language
,
Date
,
time
–> see
menu
/
Setup
)
Note: in case of empty batteries, the thermo -
stat no longer sends radio signals to the recei-
ver.
If no radio signal is received for a longer peri
-
od, the receiver switches off the heating ele -
ment due to safety reasons. However, the an -
tifreeze function remains active in the receiver
via a temperature sensor.
Battery display
Batteries full
Batteries half full
Batteries must be replaced soon
Batteries are empty and must be
changed
Control and indicator elements
9
2
1 3
5 8 6
4 7
1 Boost button/acknowledgement button
2 Knob
3 Light ring
4 Presence button
5 Absence button
6 Auto button
7 Menu button / return
8 Info button/ child lock
9 housing cover
Boost button/acknowledgement button (1)
In the operating mode:
•
press once –> to activate the
boost mode
•
press once again –> to end the
boost mode and return to the
previous program
In the menus:
•
Acknowledgement button
Knob (2)
In the operating mode:
•
Change of temperature setpoint
(manual program)
In the menus:
•
Select the menu items or set the
parameters
Light ring (3)
Blink:
•
Confirmation request