Arbiter Systems 120A, Руководство пользователя

Страница: 29 / 35

Status Commands (Read Only)
Function Command Action / Response
Help ? Displays a list of the available commands
Command Specific Help <command> ? Displays the correct syntax and options for the
listed command. Where <command> is any of
the available commands for the user role.
Show Current Status status Displays the 120A status.
Example:
Receiver Version: SW=ROM CORE 3.01
(107888) HW=00080000
GNSS: GPS GLONASS Galileo BEIDOU
Tracked: 7 3 4 N/A
SN/O : 42 34 41 N/A
Locked
Time Quality: 100nS
Time local: 03/30/2020 18:41:11
Time UTC: 03/31/2020 01:41:11
DST: auto -7:00
Show Current User who{ami} Displays the current logged in username.
Example: Username: Administrator
Show Programmable Pulse
Setting out{put} Displays the current output configuration.
Example:
OUT# Mode Time Drive Delay
1 IRIGB C37.118-on UTC LD 0
2 IRIGB C37.118-on UTC LD 0
Show Out of Lock Setting ool Displays current out-of-lock setting in minutes.
Example: Out-of-lock: 1 (min)
Show Local Offset localoffset Displays time zone setting in hours:minutes:
Example: Local Offset: -8:00
Show Firmware Version firmware Displays the current version of installed
firmware: Main, Boot, FPGA
Show Time time Displays the current date and time:
MM/HH/YYYY hh:mm:ss Local hh:mm:ss UTC
Show Daylight Saving Setting dst Displays the current setting (on, off, auto)
along with the changeover settings for the auto
mode. Example:
DST auto Start: Mar 2nd Sunday 02:00
Stop: Nov 1st Sunday 02:00
Show Relay Setting relay Displays the relay mode.
Example: relay: OOL