Arbiter Systems 120A, Руководство пользователя

Страница: 27 / 35

Configuration Commands (Config)
Function Command Action / Response
Select Satellite Systems gnss <sat-sys> {<sat-sys> {<sat-sys>}} Where:
<sat-sys> = GPS, GLONASS, Galileo,
BEIDOU
Set Antenna Cable Delay gnss <Antenna Delay> Where:
<Antenna Delay> = 0-999999ns
Set Daylight Saving Time dst <off | on | auto> Where:
off = no hours added to local time
on = 1 hour added to local time
auto = automatically add 1 hour
based on current programming
Set Daylight Saving
Automatic Changeover
Date/Time dst <mon> <week> <day> HH{:MM}
<mon> <week> <day> HH{:MM} Where:
<mon> = January
– December
<week> = Week of month: 1 = 1
st
;
2 = 2
nd
; 3 = 3
rd
; 4 = last; 5 = 2
nd
from last, 6 = 3rd from last
<day> = Monday-Sunday
HH:MM = Change over time
(hours:minutes)
Set Local Time Zone localoffset {+ | -}HH{:MM} Where:
+/-HH:MM is local time offset from UTC
Set Out Of Lock ool <min> Where:
<min> 0
– 99 minutes;
0 = off
Set Out 1 and Out 2
Output Signals out{put} <1 | 2> <IRIG | IRIGC37 |
DCF77 | PPD> <UTC | local> {<LD | HD>}
out{put} <1 | 2> <PPH> {<LD | HD>}
out{put} <1 | 2> <PPS> <1..999> {<LD |
HD>}
out{put} <1 | 2> <delay> ; <delay> = 0-
10000nS
Where:
<1 | 2> designates Out 1 or Out 2
IRIG is standard IRIG-B
without year information (B000)
IRIGC37 is IRIG-B with C37.118
extensions version 2011
DCF77 = DCF77 output signal
PPD = Pulse Per Day
UTC = Coordinated Universal Time
local = Local time
LD = Low Drive (50 Ohm output
impedance)
HD = High Drive capability (120 mA)
PPH = Pulse Per Hour
PPS = Pulse Per Seconds
delay = advances in nanoseconds