ARAG Skipper 467031, Руководство по установке

Страница: 19 / 24

19
8 Maintenance / diagnostics / rePairs
- Clean only with a soft wet cloth.
- DO NOT use detergents or aggressive products.
- DO NOT aim water jets directly at the navigator.
8.1 Troubleshooting
fault cause reMedY
The display does not switch on No power supply • Check power supply connection.
No signal enabling treatment to
SKIPPER
Power cable improperly
connected • Check green lead connection to power
cable
(par. 4.7).
Improper set-up • Check set-up (par. 7.2).
Display shows message
The GPS receiver doesn't give
valid data
Wrong antenna cable connection
• Check connection with GPS antenna
(par. 4.7).
Satellite connection in progress • Wait for connection to be established.
Display shows message
Differential correction not
available
DGPS signal not available in the
work area
• Disable DGPS (par. 6.4) .
DGPS connection in progress • Wait for connection to be established.
Tab. 1
9 technical data
Description SKIPPER
Display LCD 4", 65000 colors, 420 cd/m
2
Power supply 9 - 15 Vdc
Working temperature
0 °C ÷ 45 °C
+32 °F ÷ +113 °F
Storage temperature
-20 °C ÷ 60 °C
-4 °F ÷ +140 °F
Weight 600 g
1 USB 1.1 port HOST
Treatment input Active high (+12 Vdc)
Tab. 2
10 disPosal at the end of serVice
Dispose of the system in compliance with the established legislation in the country of use.