2
ATTENTION!
This device is for controlling the ARAG general, section and
adjustment valves installed on agricultural machines used for
weeding and spraying.
Please read the instructions contained in this handbook carefully.
ARAG cannot be held liable for damage caused by improper installa-
tion or use.
This equipment comes within the limits provided for by EN 50081-1
and EN 50082-1 concerning radio-frequency interference.
PRECAUTIONS!
In order to safeguard the functionality of the BRAVO30X the following
instructions must be observed:
- Do not spray water on the equipment.
- Do not use solvent or benzenes to clean the outer parts of the
container.
- Observe the foreseen power supply voltage (12 Vdc).
- When arc welding, make sure the BRAVO30X power supply is
disconnected. If necessary, disconnect the leads of the tractor
battery.
- Use only genuine ARAG spare parts and accessories.
The illustrations and technical data contained in this publication refer to the
date of printing. ARAG reserve the right to modify the specifications and
instructions at any time without notice.
For any requests for spare parts or after-sales service, please call your
ARAG Dealer or call the ARAG Technical Service on +39 0522 622036.
