17
Start of treatment in the automatic mode
To perform a treatment in automatic mode, proceed as follows:
1)
Check that the
symbol in the centre of the display
has illuminated, or press the
key so that it appears.
2)
Open the section valves using the relative keys.
3)
Go to the beginning of the field for treatment.
4)
Open the master valve.
During automatic operation, BRAVO30X keeps the litres per
hectare applied constant at the value set previously.
The control keys can be provided to make a temporary variation
in the volume to be distributed (fig.21).
The display shows the percentage variation of the volume to be
distributed in alternation with the volume actually applied.
To cancel the temporary variation, return the percentage
variation to zero.
Treatment controlled in manual mode
To perform a treatment in manual mode, proceed as follows:
1)
Check that the
symbol has illuminated in the centre
of the display or press the
so that it appears.
2)
Open the section valves using the relative keys.
3)
Go to the beginning of the field for treatment.
4)
Open the master valve.
5)
Use the control keys to modify the value of the amount to
be distributed (fig.21).
Attention: in the versions for the 467302 and 467304 orchard
sprayers it is also necessary to set the distance between rows
so the computer can display the correct data (page16).
Foam marker
If the foam marker kit is installed, the computer is able to
control it in 2 modes:
Manual mode:
Press the
or
keys to activate the side of the foam
marker required, and press the same key again to stop it.
N.B.: the foam marker is disabled automatically when the
master switch is closed.
Fig.22:
Left-hand side foam marker
active .
Fig.21:
Controls for varying the
distribution.
