ARAG BRAVO 327X, Руководство по установке

Страница: 23 / 56

23
English
Control unit valve switches
Control valve / drain valve switch (depends on model):
BRAVO series 3XX (crop sprayer version)
• to open the control valve, move the switch up (led on)
• to close the control valve, move the switch down (led off)
BRAVO series 30XA (orchard sprayer version)
• to close the drain valve, move the switch up (led on)
• to open the drain valve, move the switch down (led off)
Section valve switches:
normally each section valve installed on the unit has its own switch
If the number of control panel switches is different from the number of installed section valves,
refer to the following table for the section valve controls:
Number of sections Corresponding switch
2 2, 4
3 2, 3, 4
4 1, 2, 4, 5
• To open the section valve, move the corresponding switch up (led on)
• To close the section valve, move the corresponding switch down (led off)
The section valve control depend on the type of operation enabled with the computer: For full details,
refer to par. 9.15 - Type of operation
Pressure control valve switch:
• to increase the amount of liquid to be delivered, move the switch up
• to decrease the amount of liquid to be delivered, move the switch down
The switch lever automatically returns to center when released and the amount of liquid to be delivered
does not change further.
Tab. 19
Hydraulic unit valve switches
Boom locking switch:
• to unlock the boom, move the switch up
• to lock the boom, move the switch down
Boom angle adjuster switch:
• to move the boom counterclockwise, move the switch up
• to move the boom clockwise, move the switch down
Boom height adjuster switch:
• to raise the boom, move the switch up
• to lower the boom, move the switch down
Boom section movement switches:
• to open a section of boom, move the corresponding switch up
• to close a section of boom, move the corresponding switch down
Tab. 20
End of par. 9.4 - Using the keys and switches