ARAG Bravo 3 Series, Дополнение к инструкции

Страница: 15 / 28

3.2 Programming of the flow rate for the sectors
1) Keep pressed until you
access menu 1.0
2) Press the buttons to
select menu 5.0
(see following illustration)
MENU 5.0
1) Press to select which of
the 5 configurations
requires modification
2) Press to select the
sector whose flow rate
requires setting
3) Press to set the flow rate
value for the selected
sector
4) Press to set the pressure
value relating to the flow
rates entered
ATTENTION: the
reference pressure is the
same for all the
configurations
During data modification:
A) Press to modify the data
you are setting
B) Press to confirm the new
data entered
English
15
2 2