ARAG 4679004, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 76

15
INSTALLATION
7 ISOBUS SYSTEM CABLE CONNECTION
1. Connect the ISOBUS and IN-CAB cables.
2. Turn the VT on.
3. Wait for the OP complete loading (par.
8.1
).
IN-CAB IN-CAB
CONNECTION CONNECTION
ISOBUS ISOBUS
CONNECTION CONNECTION
Fig. 26
7.1 Connection of in-cab cable
Use the cable supplied in the auxiliary input package
*
.
Connection: Fit the connectors ( in-cab connection in Fig. 26), ensure they are correctly in place and turn the ring nut clockwise until blocking them.
*
ARAG Auxiliary Input control system is not compulsory on all systems, and must thus be ordered separately.
Some VTs allow controlling section valves directly from monitor touch-screen panel.
7.2 Connection of ISOBUS cable
Use cable
1
( Fig. 2 / Fig. 3 , par. 5.1 System recommended composition ) .
Connection: fix the connectors ( ISOBUS connection in Fig. 26); make sure they are correctly fitted and push until locking them.