ARAG 46707001, Руководство по установке, Страница: 17 / 28

17
5.7.3 Programming the Alfa-Bus interfaces (for speed, RPM counter, etc.) upon connection
Assign functions
Program
Set sensor data!
Revolution counter Sensor Type
Sensor number 1
Assign functions
Set sensor data!
Sensor Type Alfa-Bus interface
Alfa-Bus interface
Revolution counter
Speed
Fig. 29a
- Connect one Alfa-Bus interface: the page shown in Fig. 28a is displayed immediately. Press OK
to start setup;
- Select a function by pressing
F4 ed F6 (Fig. 29b):
- If more sensors of the same type are provided, select the number of the sensor (RPM sensor in
the instance considered, Fig. 29c);
- Press
F8 to confirm setup.
Perform this procedure any time you connect one Alfa-Bus interface.
5.7.4 Programming the Alfa-Bus interfaces (for speed, RPM counter, etc.) after connection
- Connect all sensors and interfaces
but make sure you remember the connection sequence
of the latter ; Alfa 310S displays the page shown in Fig. 29;
- Select the sensor and program every connected sensor, as described under Par. 5.7.3.
Fig. 30
Once all sensors are programmed,
the monitor automatically quits the
procedure.
Fig. 29b Fig. 29c
reset
data
shift
the
cursor
scroll data
or edit
values
confirm access
or modification
of value
quit the function
or data editing