ARAG 46707001, Руководство по установке, Страница: 16 / 28

16
It is possible to quit programming mode at any time:
Fig. 27
If you choose to quit programming mode any
unprogrammed sensors will not be recognized
by the system.
5.7.2 Programming overview
It is possible to display a programming overview at any time during the procedure:
Assign functions
Speed
Revolution counter
Alfa-Bus interface 0/1
0/2
1/3
2/6
Seed
Assign functions
Connect Sensor
Esc
Fig. 28
Press
F2
(Fig. 28): for every type of sensor, Alfa 310 displays the number of sensors assigned with
the function as well as the number of sensors set during programming of the Machine Settings
menu.
For instance,
Seed 2/6
indicates that 2 seed sensors were connected but the system is set for 6
seed sensors.
Alfa-Bus interface
item includes the following sensors: speed, RPM counter, shaft sensor
and seeding state sensor; seed and fertilizer sensors are not included .
CAUTION:
Alfa-Bus interface
item does not indicate the assigned function but only the number of
connected sensors.
Functions programming is described under par. 5.7.3 e 5.7.4.
Press
to quit over -
view page
reset
data
shift
the
cursor
scroll data
or edit
values
confirm access
or modification
of value
quit the function
or data editing