
Phone
Receiving Calls
Answering a Call
At the time of purchase, the following information is displayed.
•
If a caller’s number is sent, it is displayed in the main display. If it is
registered in the address book, their name is displayed.
•
If a caller’s number is not sent, the reason is displayed in the main
display.
“ID Unsent” “Pay Phone” “Not Support
*
”
* When caller calls from phone unable to send number.
1
When a call is arriving,
m
/
k
(Answer).
Press
o
(Silent) to stop the ringtone.
You can press
w
,
z
, or
q
to change the volume of the ringtone.
2
Talk.
Press
.
to end the call.
◎
If you are not subscribed to LTE NET or LTE NET for DATA,
disable “Data transmission” for “Mobile networks” and set
“Network Mode” to “Japan(4G)” before using the product.
◎
If a call arrives while using the address book, e-mail, etc., the call
is given priority and the function can be used again once the call
ends.
Rejecting an Incoming Call
Once the call is rejected, it is disconnected. The other party will hear
voice guidance.
1
When a call is arriving,
l
(Reject).
Rejecting a Call and Sending a Message
(SMS)
Once the Quick reply is sent, the incoming call is disconnected. The
other party will hear voice guidance.
1
When a call is arriving,
u
(Submenu)
→
[Quick
reply].
2
Select a message to send
→
k
.
◎
You can select “Write your own...” with the message to create
and send an SMS.
◎
You can edit the message to send beforehand with “Quick
responses” in “Call settings”.
◎
If the other party’s phone number is not notified, Quick reply is
not available. Also, Quick reply may not be available depending
on the communication condition.
◎
A ring call is audible to the caller until a message to send is
selected. Answering memo may answer the call before the SMS
is sent.
58