
Saf
ety P
recautions
Part
Material/Surface treatment
Rubber seal
Silicon rubber
Back cover cushion
Urethane foam
■
Battery Pack
Part
Material/Surface treatment
Outer
PC resin+PET
Connection jack
Copper alloy/Gold plating
Handling Precautions
These precautions are provided to prevent product faults and to
ensure that performance can be fully demonstrated.
Thoroughly read these precautions to ensure correct use.
■
Precautions common to the main unit, battery pack, back
cover, charger, au Nano IC Card 04, peripheral devices
●
Do not apply excessive force to the product during use. Be sure
not to put the product into a tightly packed bag or place a heavy
object on the product in a bag. Sitting on the product in your
pocket might damage the display or internal circuit board resulting
in a malfunction.
Keeping an external device connected to the external connection
jack might damage the connector resulting in a malfunction. Such
damage and malfunction are not covered by the warranty, even if
there is no external damage.
●
To ensure waterproof/dustproof property (equivalent to IPX5, IPX7
and IP5X) of the product, use the product with a specified back
cover tightly closed.
Note that the waterproof property is not guaranteed in every usage
condition. Do not allow foreign matter (liquid, dust, etc.) to get
inside the product or on the battery pack, charger, or optional
accessories. Do not open/close the back cover in the rain or with
any water on the surface of the product. Doing so might cause
water intrusion resulting in internal corrosion.
Malfunctions determined to be caused by such water intrusion are
not covered by the warranty.
●
Do not use the product in extremely hot, cold or humid places. (Use
within an ambient temperature range of 5°C to 35°C and humidity
range of 35% to 85%.)
•
Charger
•
Peripheral devices
18