POH / AFM
AQUILA AT01-100C
Section 4
NORMAL PROCEDURES
Document Nr.:
Issue:
Supersedes Issue:
Date:
Page:
FM-AT01-1010-103
A.08
A.06 (01.06.2018)
25.05.2020
4 - 14
4.5.5
Before Take-off (at the Taxi Holding Position)
1.
Brakes
APPLY
2.
Parking Brake
SET
3.
Compass and gyro Instruments
CHECK setting
4.
Fuel Selector Valve
LEFT or RIGHT, switch to the
fuller tank
5.
Fuel Pressure
CHECK if in the GREEN range
(otherwise, do not attempt take-
off)
6.
Engine instruments
CHECK if in the GREEN range
7.
Throttle
SET 1700 RPM
8.
Ignition switch
Magneto check: SWITCH through:
“L-BOTH-R-BOTH” – positions.
CHECK RPM-drop
max. RPM-drop: 120 RPM
max. difference L/R: 50 RPM
RPM drop must be noticeable
then: BOTH position
9.
Carburetor heat
PULL (ON)
(RPM drop: 20 to 50 RPM)
10.
Carburetor temperature indicator (if installed) CHECK
11.
Carburetor heat
PUSH (OFF)
12.
Propeller control lever
SWITCH 3 times between START
and CRUISE positions (end stops)
Check points:
1) RPM drop: 200 ± 50 RPM
2) increase manifold pressure
3) constant oil pressure (± 0,5 bar
then: START position
13.
Throttle
IDLE
14.
Fuel Pump
switch
ON
15.
Flap switch
T/O
16.
Trim switch
white marking
17.
Circuit breakers
CHECK all set
18.
Control column
CHECK for free movement
19.
Lap belt
FASTENED and TIGHTENED
20.
Canopy
CLOSED and LOCKED
21.
Parking brake
RELEASE