POH / AFM
AQUILA AT01-100C
Section 4
NORMAL PROCEDURES
Document Nr.:
Issue:
Supersedes Issue:
Date:
Page:
FM-AT01-1010-103
A.08
A.06 (01.06.2018)
25.05.2020
4 - 17
4.5.10 Landing
1.
Lap belt
CHECK SECURE
2.
Fuel Pump
switch
ON
3.
Carburetor heat
PULL (ON)
4.
Throttle
AS REQUIRED
5.
Airspeed
90 KIAS
6.
Flaps switch
T/O or LDG
7.
Trim switch
AS REQUIRED
8.
Flaps switch
LDG
9.
Approach speed
60 KIAS
10.
Propeller control lever
START
11.
Landing Light
switch
ON (as required)
CAUTION
In strong headwinds or crosswinds, in turbulent air or in wind shear, it may be desirable to
approach using less flaps and at a higher airspeed.
4.5.11 Go-Around (Balked Landing)
1.
Throttle
First WIDE OPEN
2.
Propeller control lever
Second START
3.
Carburetor Heat
PUSH (OFF)
4.
Flaps switch
T/O
5.
Airspeed
65 KIAS
CAUTION
Any operation with throttle wide open and carburetor heat engaged should be avoided to
prevent engine damage.
4.5.12 After Landing
1.
Throttle
AS REQUIRED
2.
Flaps switch
UP
3.
P/S Heat
switch (if installed)
OFF
4.
Carburetor Heat
PUSH (OFF)
5.
Fuel Pump
switch
OFF
6.
Transponder
OFF
7.
Landing Light
switch
OFF