16 |
A R 5 I N S T R UC T I O N M A N UA L
Port Mounting For RF Lens
STEP 3:
Place the port or extension ring inside the housing bayonet. Align the bayonet
using the four alignment notches in the housing.
STEP 4:
Push with even force on both sides of the port or extension ring until you feel it
snap into place. Make sure the bayonet is completely inside the housing.
STEP 5:
Rotate the port clockwise until it stops.
Do not force it
. If there is too much
resistance, take the port off, check the O-ring and see that the port or extension
ring is properly seated before attempting to rotate it again.
STEP 6:
Confirm that the port or extension ring is safely locked in the housing by gently
trying to rotate it counter-clockwise. The bayonet lock should prevent any
counter-clockwise rotation.
