Port Mounting For RF Lens
15 |
A R 5 I N S T R U C T I O N
M A N UA L
STEP 9:
Rotate the port clockwise until it stops. Lift the EF adaptor extension ring using
the pin on top. Continue the clockwise rotation until the second extension ring or
port can no longer be rotated.
IMPORTANT:
MAKE SURE THE EF ADAPTOR EXTENSION RING AND THE SECOND
EXTENSION RING ARE BOTH ROTATED CLOCKWISE AT THEIR MAXIMUM POSITION
FOR THE BEST ALIGNMENT OF THE DOME SHADES.
Port Mounting For RF Lens
The AR5 housing is equipped with a bayonet locking system that firmly attaches compatible
RF ports and extensions.
STEP 1:
Before mounting the port, remove the O-ring seal from its groove and carefully
verify that the O-ring and its groove are free from scratches or foreign matter.
Lubricate the O-ring with a light coat of silicone grease. Also check that the O-
ring mating surface on the housing is clean and free of any physical damage.
STEP 2:
Place the housing on its back on a soft and steady surface.
