Port Mounting For EF Lens
13 |
A R 5 I N S T R U C T I O N
M A N UA L
STEP 5:
Slide the saddle and camera inside the housing using the two guiding pins. Push it
all the way through until you hear the locking mechanism click in the housing.
Perform a check by pulling on the saddle to ensure it is firmly attached to the
housing.
Port Mounting For EF Lens
The AR5 housing is equipped with a EF adaptor extension ring for EF lens bayonet locking
system that firmly attaches compatible ports and extensions.
STEP 1:
Before mounting the port, remove the O-ring seal from its groove and carefully
verify that the O-ring and its groove are free from scratches or foreign matter.
Lubricate the O-ring with a light coat of silicone grease. Also check that the O-
ring mating surface on the housing is clean and free of any physical damage.
WARNING:
For proper handling of O-rings, follow the detailed instructions outlined in the
section (page 33).
STEP 2:
Place the housing on its back on a soft and steady surface.
