26 |
Aqua View Finder
STEP 5:
Insert your flash trigger in your camera hot shoe using the bottom
mount. Make sure it is pushed all the way in to align the LEDs with the
bulkheads on the housing.
STEP 7:
Push the optical cable bushing in their sockets in the optical
bulkheads.
The flash trigger batteries should be able to fire strobes at least 15,000+ times.
However, some CR 2045 cells have a very limited shelf life, so make sure to
change them if your flash trigger has not been used for a few months.
Aqua View Finder
The AZ6/7 housing is compatible with both the 180° Aqua View finder (#20054)
and the 45° Aqua View finder (#20059). To install your Aqua View finder, you
will have to remove the standard eyepiece.
To remove your standard eyepiece
:
STEP 1:
Using an O-ring removal
tool, remove the eyepiece
retaining O-ring (#1). If you
don’t have a removal tool,
the O-ring can also be
pinched using only your
fingers.
Note:
If you are using
SEA & SEA YS-D2
strobes with your slim flash trigger, it is
required to use the SEA & SEA Fiber-Optic Cable II (using 613 fibers).
Smaller optical fiber cable will prevent the strobes from firing consistently
