16 |
Port removal
STEP 4:
Push with even force on both sides of the port or extension ring until
you feel it snap into place. Make sure the bayonet is completely inside
the housing.
STEP 5:
Rotate the port clockwise until it stops.
Do not force it
. If there is too
much resistance, take the port off, check the O-ring and see that the
port or extension ring is properly seated before attempting to rotate it
again.
STEP 6:
Confirm that the port or extension ring is safely locked in the housing
by gently trying to rotate it counter-clockwise. The bayonet lock
should prevent any counter-clockwise rotation.
Port removal
STEP 1:
While pressing the port release lever, rotate the port or extension ring
counter-clockwise until it stops.
STEP 2:
Carefully pull the port or extension ring out of the housing.
