4
Scope of delivery Seawater R.O. AQUATEC :
High-pressure pump with electric motor, pump head in Duplex-stainless steel 1.4462.
Feed pump 12VDC, 24V plants incl. 24/12VDC DC inverter.
GFK membrane housing and membrane-element.
1 filter housing including charcoal filter-cartridge for fresh water flushing.
1 pre-filter housing including 5 Micron filter-cartridge, fastener.
2 pcs. ball valves (no. 1 and 3 flow diagram)
1 pc. 3 way ball valve (no. 4 flow diagram)
Control panel with three-way valve ¼“ (no. 2 in flow diagram).
Stainless steel high-pressure manometer, duplex-stainless steel pressure control
valve., flow meter, 2 switches for LP and High pressure pump
4 m high-pressure hose with 2 pieces mounted V4A screw connections.
2 pcs. stainless steel (V4A) high-pressure fittings for self installation.
6 m PVC-reinforced hose for intake and discharge line.
All needed plastic fittings and stainless steel hose clamps.
6 m PE-tube 3/8” for fresh water with connection fittings.
10 liter tank for preservation and cleaning.
Biocide for membrane preservation.
high current fuse-holder and fuse
coarse filter
Connection cable, through-hull fittings and sea cock must be provided on-board.
Equipment (optional)
Option 1:
Cruising kit:
4 filter-cartridges 5 Micron, 2 filter- cartridges charcoal.
Detergents Acid and Alkaline as well as Biocide for preservation.
1 set low- and high-pressure gasket for hp pump,
1 set of hp pump valves (6 pc.).
O-ring spare part kit for hp pump and membrane.
This option eliminates the smaller amount of biocides included in the standard delivery.
Option 2:
Low pressure gauge feed flow. For pressure monitoring of seawater feed flow.
