page 22 | Home II + Remineralization Installation Instructions 08/13 | www.aquasafecanada.com
Remineralization Cartridge - How to change the Remineralization Cartridge
The Remineralization Cartridge should be changed when you change your three pre-filters (good for a
maximum of 1000 gallons)
Figure 32
Replacing the
Remineralization
Cartridge
PURE
PRO
Reminer
alization
to tank
to faucet
PURE
PRO
Reminer
alization
www.aquasafecanada.com
Final Polishing Filter
Remove (see Fig. 10) the two tubes
from the fittings on either side of your
used Remineralization Cartridge.
Attach the new Remineralization Cartridge by reversing steps 3 and 2. Make
sure the arrow on the Remineralization Cartridge is pointing in the direction
of water flow when you hook it back up.
1
Depressurize your system (see Fig. 25)
Pull the
Remineralization
Cartridge out of its clips.
3
4
5
6
New Cartridge
Old Cartridge
2
Turn on the Manual Shut-Off Valve and Tank Top Valve to repressurize your system.
PLEASE NOTE: Please flush out the Remineralization Cartridge by allowing the tank to fill then empty the
whole tank down the drain through the faucet. Do this flush twice.
Unscrew the two elbow
adaptors from either end
of the old cartridge and
insert them into the new
cartridge. (Remove the
white plugs from the new
cartridge before screwing
these in.)
PURE
PRO
Reminer
alization
PURE
PRO
Reminer
alization
www.aquasafecanada.com
Final Polishing Filter