page 12 | Home II + Remineralization Installation Instructions 08/13 | www.aquasafecanada.com
Take the gasket that came with your
Large Parts Bag and remove the back-
ing. Then stick the gasket to the inside
of the saddle clamp making sure that
the yellow tubing is showing through at
least 1/2 inch (Fig. 21). Now secure the
saddle clamp in its chosen location firmly
making sure the tubing is inserted into
the drain pipe. You only need to tighten
the bolts to the point where the gasket
begins to compress against your drain
pipe. Insert the other end of the yellow
discharge line to the E- Z Flush Flow Re-
strictor on the back of the unit.
13.0 Installing the Faucet
Installing the faucet is next. You will most likely be installing the faucet through the sink top or beside
the sink top. Below are 4 different types of counters. Follow the instructions for your counter type. Be
aware that you can drill through your stainless steel sink but you will also have to drill through what-
ever counter material you have underneath your sink. If you have a porcelain sink, we advise against
an amateur installation. Either find another spot (like
beside
the sink) or get a Pro.
a) Laminate: the most common material is a laminated counter top. Choose the most appropriate
spot on top, then crawl under and see where it clears. Remember, you have a large plastic washer
to put under the counter. The safe thing to do is to drill a pilot hole with your smallest bit first. Then
drill a ½ inch hole and assemble the faucet (refer to diagram above). The rubber gasket goes under
Figure 20
Where to install
the drain saddle
clamp
NOT OK
Do NOT install the drain saddle
clamp inside the dashed line area.
It MUST be installed above the trap
You can install the
saddle clamp on
horizontal
or vertical pipes
sink
sink
OK
OK
Trap
Figure 21
Assembling and
attaching the
drain saddle
clamp
rubber gasket
quick connect
fitting
drain pipe
yellow drain
line
Insert yellow drain line
into quick connect fitting
rubber gasket
1
2
Remove the backing
from the gasket and
stick it to the inside of
the saddle clamp
making sure that the
yellow tubing is
showing through at
least 1/2 inch
The material of the Drain Saddle Clamp is flexible. If your drain pipe is slightly larger than the cir-
cumference of the drain saddle clamp simply press the saddle clamp firmly onto the drain in order
to catch the bolts on the opposite side.
TIP
