Dear Customer,
Congratulations! You have purchased one of the best pool cleaners that
technology has to offer! Your cleaner is a fully automatic, robotic pool cleaner
equipped with the patented, powerful Jet Drive propulsion system. Please
read the following carefully so that you are fully aware of all the capabilities
and features this pool cleaner has to offer!
The “Jet”, located on the top of the cleaning unit, has a patented valve mechanism that consists of just
two moving parts the valve flap and the valve lock. This Jet Valve allows the cleaner to move forwards and
backwards without the traditional wear and tear parts found in other cleaners. Although simple in appearance,
these parts are precision made and will provide many years of smooth and reliable operation. To insure the
longevity of your cleaner’s valve mechanism, never stick anything forcefully into the jet valve housing.
A powerful internal Pump Motor vacuums dirt and debris into an internal reusable Filter Bag. The Filter
Bag traps dirt and debris, including minute particles as small as 2 microns in size (20 times smaller than what
the naked eye can see) allowing only microfiltered water back into the pool. The microfiltered water is thrust
outward of either Jet Port (located at each end of the Jet Valve Housing) propelling the cleaner forward similar
to the way a jetski operates.
Your cleaner has four (4) Wheels and two (2) wheel Axles like a car. Yet one Axle is able to slide forwards and
reverse in its allotted Axle Slot. The other Axle is fixed parallel to the cleaner's body. The Turning Wheel Axle
has a Locking Pin affixed to its Axle Housing. When the Locking Pin is placed in either of its allotted Locking
Pin Holes and the cleaner moves away from the Turning Wheel Axle, the Turning Wheel Axle will slide until the
Locking Pin locks one side of the axle close to the cleaner's body while the other side of the Axle freely slides
further away from the cleaner's body. This angled Axle position will turn the cleaner in an arc motion when
traveling in this direction. When the cleaner reverses, the Turning Wheel Axle will slide closer to the cleaner's
body and will remain parallel as will the Fixed Axle. In this direction the cleaner will move in a straight line (See
cleaning pattern 1 diagram).
This straight line reverse arcing movement provides the most systematic cleaning pattern of any
cleaner today, eliminating wasted time and cleaner wear and tear, while providing you with the cleanest and
healthiest swimming water in about one hour. Reverse the Locking Pin position from one Locking Pin Hole to
the Locking Pin Hole on the opposing side of the Turning Wheel Axle with each use. This will protect the
Floating Cable from twisting in this circular systematic cleaning pattern.
To become fully aware of all the capabilities and features that your pool cleaner has to offer, please
review the entire operator manual.
