WARNING
! Remove your cleaner and its cable from the pool before people are allowed to swim!
WARNING! Your Power Supply should remain at least 10' away from the pool!
FIG. 2
Power Supply (Transformer)
with Two-Hour Automatic Shut-Off
2.1
Fuse Holder
2.2
On/Off Power Switch
2.3
Timer Control Dial*
2.4
Socket (for Floating Cable)
2.5
Reset Button
2.6
Power Supply Cord
FIG. 1
Pool Cleaner
with Floating Cable
1.1
Floating Cable
1.2
Fixed Axle
1.3
Turning Wheel Axle
1.4
Wheels
1.5
Jet Valve Assembly
1.6
Locking Pin
1.7
Valve Extension
1.8
Screw for Valve Extension
OPERATING FEATURES
Fig.2
6
Rear view
Front view
*Some models have Power Supply automatic timers that are built-in
This manual has been created to represent the set-up and troubleshooting practices required for a variety
of Aqua Products cleaners. Although the shape, color and some components featured herein may not be identical
to those of your cleaner, their operating and service procedures are. As there are a variety of features and
components for the various models produced, some pages may contain information showing each of these.
Please find the features and components found on your cleaner as the information provided may vary for each.
Fig.1
7
Detail
8
6
